Hammers Ermak

Ermak drills are a product of the Russian company Gala-Center and are made from Russian raw materials.After all, the standard set of the puncher, as a rule, includes a case, a set of drills and a peak, a spare set of brushes for the electric motor, and also an adapter cartridge, which allows the master to feel confident in any situation. The case of the punch is made of impact-resistant plastic, with careful isolation of the nodes from dust. The applied double protection against electric shock will also be more useful than ever for operator safety. The reviews that visitors to the site left about Ermak punchers will help you determine their strengths and weaknesses.

Hammers Ermak

Valentin

ERMAK PRV 30 puncher

A comment

I bought it in 2011, every 3 years I change the brushes, once a year I put grease into the cylinder, drill 22-meter-high walls with brown, beat it with a 60 mm spatula so that it flies out on the brick floor - SUPER-RECOMMEND

pros

Reliable powerful enough compact plus 4.3 joules in shock is no joke.

Minuses

NOT.

Term of use

more than five years

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Sergei

We take ours, Russian !!!

A comment

I have my own construction business. I have been working with Ermak punchers for 3 years and am very pleased with this tool!

pros

Practical and not expensive.

Minuses

not.

Term of use

less than a month

Recommendation to others

Difficult to answer

Quality
5/5
Practicality
5/5
Price
5/5

Sergei

Excellent punch ERMAK PRV-30 1050, do not overpay.

A comment

I am engaged in small construction (master at home). Since my activity did not go uphill, I bought an inexpensive Ermak PRV 30 1050. A convenient handle that does the job just for fun. In the kit everything that was useful to me in my profession for the first half a year, a few Boers and a peak, brushes and a cartridge, then I had to buy it. I have been working with him for the second year. I will not say that I use it every day, but once a week for sure. I think that I made the right choice, inexpensive, but it justifies itself in the work.

pros

Inexpensive, high quality, lightweight and practical

Minuses

not yet discovered

Term of use

more than three years

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

Sanya

Hammer Ermak PRV 36 1500 - hammering "from the heart."

A comment

I work in a construction company, in the direction - dismantling. To facilitate the manual labor of his assistants, he purchased two Yermak PRV 36 1500 punchers. Punches have been in operation for 6 months, mainly they are used to remove a layer of plaster or tile. It removes the layer data with a bang, for all the time the brushes have never been changed (for the sake of interest, I untwisted the body of the perforation and looked at their condition). Immediately after the purchase, we decided to check the operation of this unit, when they began to drill a hole in concrete, the hammer began to make rather strange sounds. Having disassembled it, we found that it was completely unlubricated and the “active” parts worked “dry”. After the lubrication, everything worked perfectly!

pros

hammering "from the heart."

Minuses

there was no factory lubrication.

Term of use

more than one year

Recommendation to others

Recommend

Quality
5/5
Practicality
5/5
Price
5/5

A photo

Konstantin

Not expensive, it works fine.

A comment

I bought "Ermak" PRG-20/500 for home use, so I chose one of the most inexpensive models.He cost me 2300 rubles. The hammer is packed in a plastic container, of good quality, the set also has three drills for drilling concrete, a key for a chuck, a chuck for ordinary drills, a rubber chip catcher and several spare brushes. It also has a reverse, you can work in 2 modes, there is a speed switch.

It is perfect for home use, I would not buy it for a professional, the gearbox heats up very quickly, you will need to constantly take breaks.

The puncher’s good qualities include light weight and miniature dimensions, you can easily do delicate work with it, and don’t be afraid to split the drilling area. And at the height of working hands do not get tired at all, due to the low weight. For work at home and at the cottage, he helps me a lot, I found him a use.

pros

It’s cheap, the most for the house.

Minuses

For a professional it will be too weak.

Term of use

more than three years

Recommendation to others

Recommend