Which cordless screwdriver is better - compare and choose

Today, few people would think of working with a hand drill or screwing a lot of screws with an ordinary screwdriver. It is much more convenient to purchase a compact and efficient cordless screwdriver. There are many models and brands of this technique, and it is quite difficult to make a specific choice for someone who does not understand this issue. Let's try to clarify the situation and determine which cordless screwdriver is better according to user reviews and the declared characteristics.

The best cordless screwdrivers and manufacturers

Which battery for a screwdriver is the best

Since this material deals specifically with cordless screwdrivers, before proceeding with the comparison and reviews of the tool, it is necessary to clarify what types of batteries are, what positive and negative sides they have and which one is preferred.

Varieties of batteries

Nickel Cadmium (NiCd). The largest dimensions, which are not always convenient for reasons of compactness, are batteries called nickel-cadmium and are designated “NiCd”. They are quite cheap and work like a clock - without failures, both at high temperatures and at sub-zero. You can charge them an impressive number of times. But the memory effect present here can serve an unkind service, in order to avoid that such a battery is sent for storage completely discharged to zero. Charging is also carried out only when the battery is completely dead.

The memory effect is the loss of battery capacity and, as a consequence, its shorter use in the intervals between recharges. If you do not wait for the complete discharge of this battery, it will again begin to recharge, it “remembers” that it was not used up completely and subsequently will not give up all the energy, but only the amount that reaches this boundary. You have to constantly monitor the battery level. Owners of a tool with such batteries often ignore this moment, as a result, part of the capacity is gradually lost.

Nickel Metal Hydride (NiMH) Batteries called nickel metal hydride are labeled with the letters “NiMH”. They are one hundred percent environmentally friendly and weigh very little. Another significant plus is their ability to work long enough without requiring recharging. The memory effect of these batteries is present, but not as pronounced as in the previous type. Alas - they have a significant minus. This is the inability to withstand frost. Even when it’s only minus two degrees outside, such a battery starts to discharge on its own. Do not store the screwdriver in the garage without heating or in the car trunk. For storage, this type of battery also needs to be charged.

Lithium-ion (Li-Ion). The third type of battery is lithium-ion. Labeled "Li-Ion". They appeared later than all - in 1991, in mass production, becoming the brainchild of the Japanese corporation Sony. They differ in the absolute absence of a memory effect, large capacity and long charge retention. They weigh forty percent less than the analogues described above. They can be charged in any state - at any charge level. Such batteries are often put on professional models, especially on screwdrivers combined with a drill.

Basic concepts

1. What does the battery capacity say? The capacity, the unit of measurement of which is called ampere-hour (Ah), determines the duration of the tool without recharging. Accordingly, they distinguish between household tools (the capacity of which is from 1.3 to 2 A / h) and professional ones with a capacity exceeding 2 A / h.

2. Charging speed. It is important when you need to do work quickly. For a household, not too expensive tool, this characteristic varies from 2 to 12 hours. But models in professional performance can be charged in an hour, or even in half an hour. Typically, such tools have lithium batteries and a pulse charger.

3. Battery voltage The voltage of the battery can vary from 3 to 36 volts. At the same time, the torque on the model at 14.4 V and at 12 V can be the same. In turn, the torque determines the power of the screwdriver and you might think that buying a tool with high voltage is not advisable. In fact, a 14.4 V battery is capable of supporting a maximum power of the tool for a longer period and, as a result, is able to work for a longer time, until the moment when the battery’s charge drop starts to reduce the power of the screwdriver.

Comparison of different types of batteries:

  li ionnimhnicd
Li-ion Nimh Nicd
 1 mesto  2 mesto 3 mesto 
 
 
Memory effect Not Yes Yes
Storage conditions Fully charged Partially discharged Completely discharged
Charging conditions In some moment Only after a complete discharge Only after a complete discharge
Number of charge / discharge cycles 600 300 - 500 < 1000
Self-discharge per month, (%) 3 - 5 7 - 10 10
Specific energy consumption, (W * h / kg) 110 - 230 60 - 70 45 - 65

Which screwdriver manufacturers are considered the best

Before you understand how to choose a cordless screwdriver, you need to determine which companies are the best and produce the most popular products on the market. There are a lot of manufacturers of screwdrivers, the market is literally filled with products of various brands. We will tell in brief about the most famous manufacturers that produce high-quality and reliable devices.

Bosch

bosch logo

This is a company from Germany that produces tools both for the home (featuring a green case) and for professional use. A household appliance of this brand is enough to assemble furniture or tighten small fasteners. But more productive and efficient devices for professionals are able to work for a long time in difficult conditions. Well suited to work in the workshop all day long.

Makita

makita logo

One of the most famous and long-existing (operating since 1915) firms producing tools for construction work. The Japanese manufacturer carefully monitors the quality of its products, constantly introducing technological innovations. Drills and screwdrivers of this brand, equipped with a battery, are most in demand among consumers. They are universal and suitable for both home and construction work. The company is constantly improving the tool.

Metabo

metabo logo

The German manufacturer (formerly called Schnizler GmbH, then - Metabowerke GmbH) with more than eighty years of experience has received during this time a well-deserved recognition. And the name “Metabo” was given by the manufactured hand drill, which received a record number of sales. The power tool of this brand is reliable and is of excellent quality. In a wide range there are both household and professional models. With them, you can easily perform even the most complex construction and repair work.

Aeg

aeg logo

The German company, founded in the last century (1887), produces very reliable and versatile devices. Screwdrivers of this brand are well suited both for making holes of various diameters, and for connecting parts with nuts, bolts, screws. Distinctive features of the brand: high-speed cartridge, quickly clamping and expanding, as well as an excellent engine cooling system.

Dewalt

dewalt logo

There are few models of this brand, but each of them is carefully thought out by the developers. All screwdrivers have good speed characteristics, high work efficiency, small dimensions. They are assembled very high quality, marriage never comes across. So buyers love this brand and are happy to acquire it.

Ryobi

ryobi logo

This American firm once began with die-casting of aluminum. Well, later she began to produce motors and spare parts for them. Still later - a tool for the garden and all kinds of electric tools. Screwdrivers manufactured by the company have a wide power range, which allows the consumer to always find what they need. The devices are high-quality and very reliable.

Hitachi

hitachi logo

Another serious and reliable company that is attentive to the quality of its products. Its tool is ergonomic, technologically advanced, modern, it is actively used both in domestic and industrial environments. The devices are light and quiet. It is a pleasure to work with them.

The popularity of various manufacturers of screwdrivers, depending on sales in online stores

Further, we present to your attention the rating of cordless screwdrivers compiled by our editorial office on the basis of reviews and technical characteristics of the tool. For these purposes, we used popular e-commerce sites such as: Yandex.Market, Goods@mail.ru and others.

Top 10.8V Battery Screwdrivers

Screwdrivers with a 10.8 V battery allow you to assemble furniture and drywall constructions and are intended for use at home.

  makita df 030 dwe mbosch gsr 10 8 mdewalt dcd 710s m
Makita DF030DWE BOSCH GSR 10.8-LI L-BOXX DeWALT DCD710S2
 
 
9 oc
 
8 oc
 
 
Cartridge type Under the bits Under the bits Keyless
Maximum torque (Nm)  24  30  24
Degrees of torque  18+1 21+1  14+1
Battery capacity, (A * h)  1,3  2,0  1,5
Battery Type Li-ion Li-ion Li-ion
Number of Batteries Included  2  2  2
Number of speeds  2  2  2
The maximum number of revolutions, (rpm)  1300  1300  1500
Diameter of drilling in a tree, (max. Mm)  21  19  19
Diameter of drilling in metal, (max. Mm)  10  10  10
Reverse  yes  yes  yes

Makita DF030DWE

A household model of the shock-free type of one of the most popular brands of power tools with a voltage of 10.8 volts and a lithium battery capacity of 1.3 ampere-hours. Charging time is only half an hour. Torque (maximum) is 24 Newton meters, rotation speed - 1300 rpm. Speed ​​control system - electronic type, there is a reverse. The weight of the device is 0.88 kilograms.

makita df 030 dwe

makita df 030 dwe 1m

makita df 030 dwe 2m

makita df 030 dwe 3m

 

+ Pros of Makita DF 030 DWE

  1. Light weight, in the hand the instrument lies like a feather.
  2. Cartridge-free design (allows you to reduce time and save money, since cartridges are quite expensive).
  3. The presence of a shortened base.
  4. Dimensions even reach those places that are difficult to access.
  5. A comfortable holster, two batteries and a plastic box for small parts are included.
  6. It is possible to adjust the power.
  7. Fast battery charging.

 

- Cons Makita DF 030 DWE

  1. Low battery capacity.
  2. There is axial play in the spindle.
  3. Drilling holes is problematic.
  4. The price is far from budget.
  5. The resource of an expensive (six-tenths of the cost of the device) battery is two to three years.
  6. It is very difficult to change a bat with one hand.
  7. There is no eyelet to hang. Only a holster.
  8. The device is sensitive to dust and dirt.
    Important details may clog.
  9. The backlight for the work area is slightly lowered.

Results: If you need a sufficiently powerful, unusually light and small screwdriver for homework, and its price does not really matter, then this model is quite suitable. Charging is enough for 5-6 hours, the device charges quickly. Having a replaceable battery speeds up the process. However, the unit will not work for heavy work - the gearbox will quickly be destroyed. Its main purpose is assembly work around the house.

 

BOSCH GSR 10.8-LI L-BOXX

Another model of the German manufacturer of power tools with a voltage of 10.8 volts. Two-speed screwdriver, with electronic speed control. The battery is lithium. Torque (maximum) is 30 Newton meters, rotation speed - 1300 rpm. Speed ​​control system - electronic type, there is a reverse. The weight of the device is 0.8 kilograms.

bosch gsr 10 8

bosch gsr 10 8 1m

bosch gsr 10 8 2m

bosch gsr 10 8 3m

 

+ Bosch GSR 10.8-LI 0 Pros

  1. Light weight and compact dimensions.
  2. Good power.
  3. There is a very accurate backlight, which is never superfluous.
  4. Fast battery charging.
  5. Lack of cartridge.
  6. There is a drilling mode - it proved to be good on wood.
  7. Lithium battery, fast charging.
  8. Spare battery included.

 

- Cons Bosch GSR 10.8-LI 0

  1. There are instances that have problems with adjusting the speed with the trigger.
  2. The price is a bit high.
  3. Users periodically complain about not too high quality performance. A particularly common disaster is the burnout of the charger.
  4. The cartridge is not magnetized. Because of this, you have to use two hands when replacing a self-tapping screw - one will not work. This is inconvenient when, at the height, for example, you balance.
  5. The backlight could be brighter. And it works only when you hold the button.
  6. The reverse button is soft - you can press it randomly.

Results: To assemble the furniture and tighten the small fasteners, this screwdriver is quite enough. It is extremely convenient for furniture work, and due to its light weight, your hands will not get tired even after prolonged use of the unit. For sixty screws, one battery charge, as shown by customer experience, is enough.

 

DeWALT DCD710S2

The third household model is an American brand, with a voltage of 10.8 volts and a lithium battery capacity of 1.5 ampere-hours. Torque (maximum) is 24 Newton meters, rotation speed is 1500 rpm. Speed ​​control system - electronic type. There are reverse and fixing the spindle. The weight of the device is 1.1 kilograms.

dewalt dcd 710s 

 

+ Pros of DeWALT DCD710S2

  1. Lightness, small size (the screwdriver fits perfectly in the hand, and it does not get tired).
  2. Ergonomics (especially handles), nice design.
  3. The presence of a convenient case.
  4. Ability to change equipment with one hand.
  5. Solid power.
  6. The case is quite durable. It is made of rubber linings. This prevents slipping when the device is on an inclined plane.
  7. The gearbox is made of metal.
  8. The lithium battery, it charges quickly.

 

- Cons DeWALT DCD710S2

  1. The light weight of the device does not allow it to be held evenly when drilling holes in the vertical direction. The center of gravity is poorly felt.
  2. A slight beat of the drill when the chuck rotates. A typical drawback of such models. However, the play here is not very big - for 80 millimeters of length it is no more than 0.5 millimeters.
  3. A bit overpriced.

 

This model is quite effective and efficient. Just remember that you need to use it for installation and dismantling works only with materials such as wood, thin metal sheets, lumber.

 
What 10.8 V screwdriver did you decide to buy?

Best 12v cordless screwdrivers

Such devices are most popular among home craftsmen. They are not too expensive, but quite productive and work autonomously for a long time. Determining which cordless screwdriver is best for the home, many dwell on similar models. They are useful for small summer or home repairs, they will help to drill metal and wood.

  aeg bs 12g2 mmakita 6271 m
AEG BS 12G2 LI-152C Makita 6271DWAE
 1 mesto
9 oc
 2 mesto
8 oc
 
 
Maximum torque (Nm) 30 30
Degrees of torque 24 16
Battery capacity, (A * h) 1.5 1.9
Battery Type Li-ion Ni-cd
Number of Batteries Included 2 2
Battery Level Indicator  no no
Battery charge time, (h) 1 1
Number of speeds 2 2
The maximum number of revolutions, (rpm) 1350 1200
Speed ​​adjustment electronic mechanical
Diameter of drilling in a tree, (max. Mm) 30 25
Diameter of drilling in metal, (max. Mm) 10 10
Reverse yes yes
Cartridge Diameter 0,8 - 10 0 - 10
Backlight no no

AEG BS 12G2 LI-152C

Model with a 1.5 ampere-hour lithium battery. Charging time is only one hour. Torque (maximum) is 30 Newton meters, rotation speed - 1350 rpm. Speed ​​control system - electronic type. There is a system for fixing the spindle, as well as reverse. The weight of the device is 1.6 kilograms.

aeg bs 12g2

aeg bs 12g2 1m

aeg bs 12g2 2m

 

+ Pros AEG BS 12G2 LI-152C

  1. The tool is powerful, but at the same time small in size.
  2. Sufficiently large battery capacity.
  3. Well combined cost and quality characteristics.
  4. The handle is perfectly in the palm of your hand - the shape is comfortable.
  5. Gears made of metal.
  6. There is a spare battery.
  7. The beat of the beat is NOT felt (absolutely).

 

- Cons AEG BS 12G2 LI-152C

  1. There is no indication showing how much charge is left. It is not comfortable.
  2. The case is not too ergonomic and bulky. It’s especially inconvenient to take with you.
  3. The backlight is missing.
  4. Somewhat heavy (compared to peers).
  5. The charger is large and bulky, it occupies the fourth part of the case.

Results: This tool can be advised to home masters. The screwdriver copes with fasteners perfectly, has an adjustment of the torque levels and a drilling mode. It is also worth paying attention to the lack of backlighting - for some it may be important.

 

Makita 6271DWAE

The model of the Japanese company is characterized by an increased capacity for such a voltage - 2 ampere-hours. The charging time of the lithium battery is one hour. Torque (maximum) is 30 Newton meters, rotation speed - 1300 rpm. Speed ​​control system - electronic type. There are spindle locking system and reverse. The weight of the device is 1.5 kilograms.

makita 6271

makita 6271 1m

makita 6271 2m

 

+ Pros of Makita 6271DWAE

  1. Lightweight, reliable, durable.
  2. The power button works smoothly and gently.
  3. There is a reverse.
  4. Great balance.
  5. A spare battery is included.
  6. The case is good, very comfortable, not bulky.
  7. The handle is ergonomic.
  8. The case is short, which allows you to crawl into poorly accessible places.
  9. Quick change of equipment thanks to the existing spindle self-locking.

 

- Cons Makita 6271DWAE

  1. The cost is high.
  2. Bits from the cartridge can be lost, as it is kept in it rather weakly.
  3. Weak torque at both the first and second speeds. You can stop it with your hand.
  4. The crown made of plastic for switching speeds.
  5. There is no bit space.
  6. Gear housing made of plastic.

Bottom line: For a home, this is a great model if you don’t worry too much about spending. Lightweight, compact, durable and reliable tool capable of working for many years without breaking. A capacious battery is enough for about 80 screws. A convenient case allows you to take a screwdriver with you to any place.

 

What 12 V screwdriver did you decide to buy?

The best 14.4 V screwdrivers

Such devices can already be classified as professional. They can help make holes of various diameters, as well as fix the hardware. Moreover, not at home, but, say, in the workshop. Or during construction work.

  bosch psr 14 4 li 2mmakita bdf343she m
Bosch PSR 14.4 LI-2 Makita BDF 343 SHE
 1 mesto
9 oc
 2 mesto
8 oc
 
 
Maximum torque (Nm) 40 36
Degrees of torque 10 16
Battery capacity, (A * h) 1,5 1,3
Battery Type Li-ion Li-ion
Number of Batteries Included 1 2
Battery Level Indicator yes no
Battery charge time, (h) 1 0,5
Number of speeds 1 2
The maximum number of revolutions, (rpm) 1300 1300
Diameter of drilling in a tree, (max. Mm) 30 25
Diameter of drilling in metal, (max. Mm) 10 10
Reverse  yes  yes
Cartridge Diameter 1 - 10 0,8 - 10
Backlight yes no

Bosch PSR 14.4 LI-2

The model of the German manufacturer has a lithium battery capacity of 1.5 ampere-hours. Charging time is about an hour. Torque (maximum) is 40 Newton meters, rotation speed - 1300 rpm. Speed ​​control system - electronic type. There is a reverse and fixing the spindle. The weight of the device is 1.14 kilograms.

bosch psr 14 4 li 2

bosch psr 14 4 li 2 f1m

bosch psr 14 4 li 2 f2m

bosch psr 14 4 li 2 f3m 

 

+ Bosch Pros PSR 14.4 LI-2

  1. Perfectly balanced powerful and lightweight tool.
  2. The drill clamp tightly, nothing hangs anywhere and does not play.
  3. It sits perfectly in the palm of your hand - much better than many 10-volt models.
  4. There is a spindle lock.
  5. A modern lithium battery that does not suffer from “memory loss”.
  6. There is a torque indicator.
  7. Very comfortable and well-made lighting.
  8. Long working time on a single charge.
  9. High-quality assembly.
  10. It is possible to charge the battery without pulling it out of the screwdriver.

 

- Cons Bosch PSR 14.4 LI-2

  1. The device comes with just one battery. It would be nice to have a second one.
  2. The storage case is not ergonomic and compact.
  3. Having released the button in the high-speed drilling mode, you can observe after a loud click of a spark near the motor brushes. This indicates a high load and the possibility of breakage due to this.
  4. The overload protection system is too reinsured.
  5. When you need to switch the reverse, you have to use the second hand, since the thumb of the right hand does not reach the button.
  6. In the upper slots for blowing the motor brushes, dust and dirt are often clogged.
    The speed controller is a little taut.
  7. The gearbox is weak.
  8. There is no belt clip.

Results: If you are looking for a short and powerful device at an adequate price, then this model may well suit your taste. Smooth start, accurate backlighting, excellent balance, German quality. All these features make the unit an excellent device for any home use. However, the case is not too convenient, and the spare battery is not included. It is worth knowing about it.

 

Makita BDF343SHE

This model has a capacity of 1.3 ampere-hour lithium battery. Charging time with a pulse charger is half an hour. Torque (maximum) is 36 Newton meters, rotation speed - 1300 rpm. There is a reverse, fixing the spindle. Speed ​​control system - electronic type. The weight of the device is 1.2 kilograms.

makita bdf343she

 

+ Pros of Makita BDF343SHE

  1. Great design, ergonomics.
  2. The device is pleasant to hold in hands.
  3. A sufficiently high tightening torque allows you to work with self-tapping screws of 200 millimeters.
  4. High reliability and performance of the device.
  5. Included is a second battery.
  6. The housing is very easy to clean from dust and dirt.
  7. Very convenient cartridge.
  8. All parts are very well fitted to each other.
  9. Capacious case.
  10. The device is quite light.
  11. On one battery (without recharging) the instrument is able to work from an hour to an hour and a half.

 

- Cons Makita BDF343SHE

  1. The cartridge has some backlash.
  2. If necessary, purchase a fastener for bits it is quite difficult to find on sale.
  3. Still, the size of the case is very solid. It could have been smaller.
  4. There is no protection against overloads, too low a battery charge and overheating.
  5. There is no indicator showing the charge level of the lithium battery.
  6. The gearbox is plastic; over time, it often fails (teeth and splines wear out). The first gear starts to fly out.
  7. There is no illumination of the working area.

Summary: The model for home use is simply excellent - many consumers say so. But in extreme conditions (at a professional level), a screwdriver is not recommended. For example, they work on drywall with large volumes. A couple of years - and the electric motor brushes will be completely erased. Due to the design features, they cannot be replaced in this device. We'll have to change the whole engine, and it's expensive.

 
What 14.4 V screwdriver did you decide to buy?

The best 18v screwdrivers

These professional models that are suitable for any construction, repair and installation work. They can be used in mass production conditions when it is required to work regularly with a large number of fasteners. After looking further at the description of three popular models, you can try to determine for yourself which professional cordless screwdriver is better.

  ryobi rid 1801m mdewalt dcd 780 c2mmakita 634 dwae m
RYOBI RID 1801M DeWALT DCD 780C2 Makita 6347 DWAE
 1 mesto
9 oc
 2 mesto
9 oc
3 mesto 
8 oc
 
 
Maximum torque (Nm)  220  60  80
Degrees of torque - 15 + 1 16 + 1
Battery capacity, (A * h) - 1,5 2
Battery Type Fit: Li-lon / Ni-Cd Li-lon Ni-cd
Number of Batteries Included 0 2 2
Battery Level Indicator yes  no no
Number of speeds 1 2 2
The maximum number of revolutions, (rpm) 3200 2000 1300
Speed ​​adjustment - electronic electronic
The maximum number of beats per minute, (bpm) 3600 - -
Pulse mode yes - -
Diameter of drilling in a tree, (max. Mm) - 38 38
Diameter of drilling in metal, (max. Mm) - 13 13
Reverse yes yes yes
Spindle lock yes yes  no
Cartridge type Under the bits Keyless Keyless
Cartridge Diameter - 1,5 - 13 0 - 13
Backlight yes yes no

RYOBI RID1801M

A professional model weighing 1.2 kilograms, which has impressive torque and does not have a battery and charger in the kit (any type of battery is suitable for a screwdriver). Torque (maximum) is 220 Newton meters, shaft rotation speed - 3200 rpm in one minute. There is a reverse, there is a spindle fixing system.

ryobi rid 1801m

ryobi rid 1801m 1m

ryobi rid 1801m 2m

ryobi rid 1801m 3m

 

+ Pros of RYOBI RID1801M

  1. The mechanism for replacing bits is extremely convenient. With one movement of the hand, a bit is pulled out and inserted.
  2. The unit is able to work with any bolts and screws.On one charge (1.5 ampere-hour battery) winds them up to 400 pieces.
  3. Magnificent bright illumination from three LEDs.
  4. Huge torque - 220 Newton meters.
  5. Fairly low cost for this class of devices.
  6. There is a holder for spare bits, as well as a convenient magnetized platform for screws and screws.
  7. Reliable cartridge in which there is no transverse play.
  8. Excellent cooling gear housing.
  9. Very strong unit - it was dropped onto concrete from ten meters, and at least that!

 

- Cons RYOBI RID1801M

  1. The unit is slightly heavy. When you work at height, your hands get tired.
  2. It is not very convenient that the backlight turns on only when the electric motor starts. It would be nice a little early to aim where you need to.
  3. The kit does not have a battery or charger. They have to buy separately - additional costs. But you can pick up what you need.
  4. Without calculating the strength, any thread can be easily torn off. Especially on wood boards or drywall.

Results: The model is good, solid, long-playing. It can do a lot - twist any fasteners (for example, long self-tapping screws 150 mm), drill any material. True, inexperienced craftsmen who still do not know how to handle a powerful tool, often chop bits or screws. However, the ability to smoothly increase momentum comes with time. It should be noted and a fairly solid weight of the unit.

 

DeWALT DCD780C2

Professional model of a screwdriver with a quick-clamping chuck and a lithium battery with a capacity of 1.5 ampere-hours. Charging time using a pulse charger is half an hour. Two batteries included. Torque (maximum) is 60 Newton meters, rotation speed is 2000 rpm. Speed ​​control system - electronic type. There is a reverse and fixing the spindle. The weight of the device is 1.55 kilograms.

dewalt dcd 780 c2

dewalt dcd 780 c2 1m

dewalt dcd 780 c2 2m

dewalt dcd 780 c2 3m

 

+ Pros of DeWALT DCD780C2

  1. The device is powerful, but compact enough. It also weighs a little.
  2. At the second speed, it produces very high revs. Wood is drilled with ease.
  3. The quick-clamp type chuck, equipped with a ratchet, allows not only to feel, but also to hear the moment when clamping occurs.
  4. Ergonomics and workmanship are just wonderful.
  5. One charge of a very quickly recovering battery (20-30 minutes) is enough for half a day, no less.
  6. The case is comfortable and not too big.
  7. There is a very practical magnetized pad that can be used for screws or bits.
  8. There is a second (spare) battery.
  9. Charger type pulse.
  10. Wide range for effort adjustment.

 

- Cons DeWALT DCD780C2

  1. The diode, designed for backlighting, is not very well located. And it does not shine exactly where it is needed, but a little lower.
  2. The device is quite noisy.

 

Summary: Judging by user reviews, the tool is really great. Any work will be done quickly and efficiently. And installation under his power, and drilling. And all this is on a professional level. A durable, reliable, not too heavy and compact device is practically devoid of flaws. Unless the backlight turned out to be unsuccessful.

 

Makita 6347 DWAE

And at the end of our review, a professional keyless model of one of the most popular brands. He has a nickel-cadmium battery. Torque (maximum) is 80 Newton meters, rotation speed - 1300 rpm. There is a reverse. Speed ​​control system - electronic type. A screwdriver weighs 1.5 kilograms.

makita 634 dwae

makita 634 dwae 1m

makita 634 dwae 2m

 

+ Pros of Makita 6347DWAE

  1. The tool fits very comfortably in the hand and is characterized by ergonomic controls.
  2. Electric motor brushes can be easily and quickly replaced.
  3. Two rechargeable batteries are included.
  4. High torque.
  5. Power makes it easy to screw self-tapping screws 80 millimeters long and 8 millimeters in diameter, even into concrete.
  6. The battery lasts for a whole day.
  7. Great weight distribution.
  8. Strong reliable cord.
  9. Spacious case where you can put everything.
  10. Convenient start button.
  11. Good, sturdy, sturdy bit holders are two. They are equipped with metal brackets.
  12. Strong vibration is not observed.

 

- Cons Makita 6347DWAE

  1. A bit heavy device.
  2. Memory Nickel Cadmium Battery. And she does not understand - glued.
  3. Sometimes the gear shift sticks.
  4. Weak cartridge, it happens that poorly holds bits, especially if they are long. Constantly have to tighten the cartridge, and this lengthens the workflow.
  5. Rechargeable batteries are expensive.
  6. Flimsy case. You open - and the loops hang out.
  7. It takes a long time to charge the battery.

Results: This tool is quite suitable for those who need to work with a large variety of fasteners. The machine copes with such tasks quickly, accurately and powerfully, has a long battery life from a single charge and an ergonomic design that makes it easy to use. But the unit is quite heavy, which is worth taking note. Again, a reliable and durable nickel-cadmium battery has a significant drawback: the memory effect. However, it can, if desired, be replaced by lithium. Another complaint of users to this model is a weak cartridge, which constantly has to be pulled up.

 
What 18 V screwdriver did you decide to buy?