Convector or infrared heater - which is better to use

Providing additional heat in a residential or commercial building is the most important factor in comfort during the onset of cold weather. To understand that a convector or infrared heater is better, we decided to analyze the main features of these types of devices. For the analysis, such criteria were taken as the principle of operation, the level of environmental friendliness and safety, price factor, dimensions, comfort of use, room heating rate, mobility and others.

Which heater is better than infrared or convector

What is the difference between an infrared heater and a convector

Convectors

Convection-type heaters are represented by electric and gas models. In a residential environment, electric models are used. They are used in apartments, houses, in the country, in office premises - in all buildings where you can connect electrical power.

Convector operation principle. The convector makes heating of cold air and evenly distributes the heated in a heated room. Convectors do not radiate heat, like many heating appliances, but fill the room with it.

The device is placed at a height of not more than 15 cm from the floor. Next, the simple laws of physics apply: cold air is at the bottom, because it is heavier than warm air - it enters the heater through a special grill and passes through the radiator. Passing through the radiator, it heats up and enters the room. Warm air rises. As it cools, it drops, and the procedure repeats, providing constant heating of the air in the room.

The principle of operation of a convector heater

Design features. The heater consists of two main parts: the body (convection chamber) and the built-in heating element. Ten does not come in contact with the metal case, so grounding is not required. Between the heating element and the housing there is a protective layer of special heat-resistant plastic. The process of air exchange is carried out naturally, without additional details inside the structure. Due to the lack of a fan, the silent operation of the convector is achieved.

Modern convectors are equipped with a thermostat, which ensures the maintenance of a stable indoor air temperature with a high level of accuracy. The user sets the required temperature, and the thermostat turns the device on and off as necessary. Control modules allow you to combine several convectors in a group and fully control the microclimate in the house.

Convectors are equipped with various additional options that help ensure maximum comfort in the room. The device can be equipped with a timer, indicators for connecting to electricity, a device for remote control, humidifier.

Convector heater device

1. The front panel.
2. Lattice with guides for the release of warm air.

3. Power button.
4. Temperature adjustment.

5. The electronic module.
6. Closed heating element.
7. Temperature sensor.

Infrared heater

Infrared heater - a modern heating device used to heat rooms for various purposes.

The principle of operation of the infrared heater. The principle of operation of this device can be compared with sunlight.An infrared heater functions by heating objects in the room with infrared radiation - in turn, they give off heat to the air. This allows you to heat small areas or create local heating. To obtain the desired effect, you do not need to wait until all the air in the room or office heats up.

The principle of operation of the infrared heater

Design features. The main structural element is an emitter that emits infrared radiation and provides heating. Depending on the type of device, a halogen, carbon, ceramic or tubular heating element is used.

Reflector - a part of the design that provides directivity of heating and protection against overheating of the housing. It is made of modern materials with a high level of thermal resistance in parabolic or linear form.

A protective part in the form of a grill or partition to protect against direct contact with the hot surface of the emitter, a necessary element for the device used in a residential apartment or house.

Infrared heater device

1. Carry handle.
2. Protective grille.

3. The emitter.
4. Power button.

5. Reflector.
6. The leg.

Speed ​​and heating features

Convectors work by filling the room with warm air in a natural convective way. These devices do not use fans or other additional elements that accelerate the heating process. Therefore, the heating rate relative to infrared devices is low.

The principle of operation of the infrared heater provides quick and directional heating, under the influence of infrared radiation. But first of all, objects, walls and people are heated, and the air in the room is already heated from them. It has been experimentally confirmed that heating is felt after 27 seconds. The directed action of the infrared heater allows you to achieve a comfortable temperature in the area of ​​the room where people are located. In this case, the accumulation of warm air at the ceiling will be minimized.

The difference in the heating of infrared heaters and converters
The difference in heat distribution when using a convector and ceiling infrared heater.

The fastest person will feel the heat from an infrared heater, however, if we talk about uniform heating of air throughout the room, then a convector will cope faster. The directed action of the infrared heater allows the use of these devices in those places where drafts are present - on terraces, in gazebos and production rooms. The convector is able to provide uniform heating of air in a closed room.

Which heater is more comfortable to use

Electric convectors are presented in two versions of models, based on the installation features. Wall models are attached to the wall at a height of 10 - 15 cm from the floor. Installation does not take much time. After fixing the device on the wall, it does not interfere with movement in the room and is not striking.

Wall convectors

Floor models - compact, equipped with castors or legs-stands. Due to its light weight and parameters, the device is easy to transfer from one room to another. The presence of additional functions increases ease of use.

Floor convectors

Infrared heaters are divided into mobile and stationary. Mobile models of infrared heaters can easily be moved within the room or moved to another room. However, the body of the infrared heater is often very hot, so you must be careful when changing the orientation of the device or moving it to another room. Although the protective grid protects against direct contact with the emitter, it has a fairly high temperature.

Mobile IR heater

As for stationary infrared heaters, they are practically no different, in this regard, from convection heaters. They are installed on the walls or ceiling and do not cause any inconvenience to the inhabitants of the room.

Ceiling IR heater

Convectors will be more comfortable to use. They do not require such control as infrared devices.A convector can be easily left unattended, while a powerful infrared heater can radiate a large amount of heat, which can lead to negative consequences for both a person and closely placed surrounding objects. Both devices are silent. However, users note that some models of infrared heaters emit a crack when heating and cooling, caused by thermal expansion of parts.

Which heater is safer to use

Electric convectors comply with all fire safety requirements and are equipped with overheat protection. Due to the special protection of PETN, the heating part does not touch the metal case, therefore, there is no need for grounding. The convector surface does not overheat. Wall options are securely mounted on the wall, and floor models are stable.

The heating element of the infrared heater has a high temperature, so its surface is closed by a partition or mesh - this protects against burns when accidentally touched. Models are equipped with overheat and fall protection functions. Radiation is safe for humans, but it is not worth it to abuse and be under its influence for a long time.

In terms of safety, the convector will be much more reliable. It does not have very hot elements and does not produce radiation. Infrared heaters, when used correctly, comply with fire safety standards, but they are more fire hazardous devices. In addition, it should be mentioned that being under too much infrared radiation for a long time is not very good for health. This can be compared with prolonged exposure to the scorching sun. Of course, there will be no fatal outcome, but a headache can be guaranteed.

Which heater is more environmentally friendly

The specific nature of the convector indicates that when the air moves in the room, dust will rise. Convection during operation of the infrared device is present, but it is weakly expressed.

Often you can hear the opinion that this or that type of domestic heater burns oxygen. In fact, not a single heater powered by an electric network burns oxygen since there is no open burning. That is why this feature cannot be used as a merit of some and a disadvantage of other types of heaters.

Both devices, in the course of their work, do not emit harmful substances, however, dust raised during the operation of the convector can be very harmful for allergy sufferers. Intensively working convectors are able to reduce the humidity level in a room more than infrared models. The infrared heater does not have a strong convective movement of air masses. But here it is necessary to ensure that dust and other small objects that do not burn out when the heater is turned on create an unpleasant odor.

Dimensions of heaters

Convectors are thin, but rather large in height and width of the device. Due to the small thickness, wall-mounted models, after installation, are almost not conspicuous.

konvektor

Dimensions of infrared devices depend on the type and technical features of the device. The most compact models of portable type for spot heating.

Compact IR heater

Ceiling models have a considerable length (about 1 - 2 m.). But they are located in those places where in no way affect the area of ​​the room.

potolochnue ik obogrevateli
Ceiling IR heaters.

If we compare mobile devices that can be transferred from one room to another, then among them you can find infrared heaters of a very small size, approximately 25-30 cm in width and height. The principle of operation of the convector does not allow making these devices as small. As a rule, convectors have a width of at least 44 cm and a height of at least 41 cm.

The cost of the device

Prices are presented in a wide range of options.

Pricing Factors:

  • Power;
  • Features and additional properties;
  • Brand

Average prices of household infrared heaters: 2400 - 4000 rubles. Average prices of electric convectors: 1800 - 3500 rubles. Models with a mechanical thermostat are 20 to 30% cheaper than designs with an electronic or programmable device.

Which heater is more durable

The principle of operation of convectors allows for a long period of successful operation. Most manufacturers guarantee 5 years of operation. Practical user experience indicates an average life of 10-15 years.

Depending on the type of heater, the correctness and characteristics of the operating conditions, the service life of the infrared heater can be from 15 to 25 years. Ceramic models have the longest life.

What is more economical convector or infrared heater

The level of energy consumed depends on the technical features of the device. According to studies, the use of infrared models is more economical. Energy costs depend on the temperature in the street, the desired room temperature, the level and quality of the insulation of the room, the area of ​​the windows and the quality of the glass.

If we compare devices of the same power, they consume approximately the same amount of energy. Saving the use of an infrared heater is achieved by the fact that to create a comfortable temperature in the room it needs to work less time than a similar convector. Therefore, the infrared heater can be turned on for 20 to 30 minutes per hour, while the convector should work without interruption.

Comparison of infrared heaters and convectors

 sr ik 2sr konvektora 2
Infrared heater Convector heater
   
 
 
Productivity, Efficiency 90 - 95% 95%
Heating time quick warm up slow warm up
Features of heating heats objects, walls and people warms the air
Comfort of use average tall
Security have protection against overheating, but some devices cannot be left unattended have protection against overheating, can be left unattended
Environmental friendliness good, but there may be a burnout of dust entering the emitter during convection dust rises
Noise level some models may make small sounds due to thermal expansion completely silent devices
Versatility more universal, can be used both for heating indoors and outdoors less universal, their use is limited
Mobility floor models are small have a larger size
Economical use medium or high medium or low
Lifetime 15 -25 years old 10 - 15 years
Use as a primary heating system It is possible to combine many devices into a single network of ceiling heaters it is possible to integrate many devices into a single network of wall convectors


It is difficult to say unequivocally which heater is better than infrared or convector, it all depends on your needs and operating conditions. We can give some recommendations on this subject.

The feasibility of using an infrared heater:

sr ik

It is required to provide only a point, uneven heating in a certain area of ​​the room.

It requires heating in a room with drafts or on terraces, a gazebo, awnings.

You need a mobile device that you can carry with you, for example, to work.

The feasibility of using a convector heater:

sr konvektora

It is necessary to ensure constant uniform heating of the room, which has no drafts.

It is necessary to heat the room where small children can be.