Hammers Fiolent

Fiolent plant produces high-precision equipment for the defense industry. Power tools are manufactured here with the same stringent quality control. Reviews of Fiolent punchers will help you choose a professional or semi-professional tool that has high quality and strength characteristics. The reliability of the Fiolent punchers is not inferior to foreign brands, and the price is much more attractive.

Hammers Fiolent

Pz-1200 Beast !!!
A comment
Very high quality punch. I’ve been working for 5 years and never let me down. A very powerful and hardy machine. I worked for 3 hours each with a hard drive. This beast warmed up of course, but you can work in it almost without smoke breaks. I bought it on the advice of my friend and did not regret even once.
pros
Very hardy quality device, price, power, inexpensive parts.
Minuses
They are not here!!!
Term of use
more than five years
Recommendation to others
Recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more
P2 850 re
A comment
Worked for one week then it started spinning badly then jammed
pros
While working, he suited me
Minuses
Spoiled quickly
Term of use
less than a month
Recommendation to others
Difficult to answer
  • Quality
    1/5
  • Practicality
    1/5
  • Price
    1/5
Show more
Punch Fiolent P3-1200 - a decent choice.
A comment
I use the Fiolent puncher for about six months. I decided to buy a hammer when I moved to a new apartment without repair. My original goal was Bosch. But after talking with his friend, a professional builder, I bought a P3-1200 and did not regret it.

The quality of the punch is not inferior to branded manufacturers. Convenient and very easy to operate, multi-functional. Many devices have plastic gearboxes, the teeth of which wear out quickly under heavy loads and (attention) the warranty does not apply to them. In the Folent punch, the gearbox is metallic. Cartridge replacement is also possible. Analogs of Bosch and Makita are several times higher than the price of this tool. And their repair in the service center will result in a pretty penny. He tested the puncher as best he could at home. I drilled, hollowed concrete walls and ceilings (a panel house), I’m not afraid of dust, the main thing after work is not to forget to clean it. With such a hammer drill, work is a joy.
pros
Low cost, reliability.
Minuses
Not
Term of use
half a year
Recommendation to others
Recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more
Fiolent PZ-1300 - reliability and reliability again
A comment
I am a professional builder. And I use a puncher daily. Many devices of various companies have passed through my hands, from cheap Chinese to expensive German. Now I use the Fiolent punch, and that's what I want to say. In my opinion, this machine is the most reliable. Yes, it is slightly inferior in design to German and Japanese counterparts, but in quality superior to them. The device is universal. They can do absolutely all the work. This device has a smooth start and stop. The rotary hammer is also equipped with a special vibration damping handle, which helps a lot during long work. I would like to pay special attention to protection against dust. It is done correctly, and the effect is not long in coming. The device can be serviced independently. The housing is easy to disassemble and there is free access to the bearings for their lubrication.
pros
Pros: reliability, rugged case, protection against dust and vibration, the possibility of independent maintenance.
Minuses
Cons: no.
Term of use
more than three years
Recommendation to others
Recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more
The Fiolent P3-1200 puncher - high quality, at low cost.
A comment
I met the P3-1200 model puncher of the company Fiolent for the first time at work. My work is related to construction, volumes are large, and he showed himself only on the positive side. For example, they had to perforate more than 400 holes, 24 mm in diameter, in the hot period of summer, when the temperature went over 30 degrees, he did not fail me. Of course it overheated, had to be interrupted every 30 minutes, but nevertheless he performed the work at 5+. Sometimes the device jammed when reinforcement came into the depth of the hole, but it has protection against large overloads, so I had no problems with this.

The device is simply excellent, according to its capabilities it fully complies with Makita or Bosch firms, but the price of Fiolent is much more attractive, so everyone will make the right choice for themselves when buying. On YouTube, I found a detailed review of this model, anyone interested would be very useful to see.
pros
Reliability, practicality, price.
Minuses
Not.
Term of use
more than three years
Recommendation to others
Recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more


Recommended reading:

Climate technology - articles and reviews