5 best glue guns for power and battery models

To figure out which glue gun is better to purchase, we recommend that you familiarize yourself with the rating of tested models based on user reviews and the main characteristics of this tool. This will help you choose the glue gun that best suits your needs for specific tasks.

Rating of the best glue guns based on user reviews

The best network powered glue guns

Glue guns with a connection to 220 V have a heating element inside, which receives power from a household outlet. The installed thermal unit facilitates the melting of the solid glue sticks supplied to the internal parts. The feed system may be automatic or mechanical.

The main feature of network models is their reduced weight, which is convenient for long-term work during the day or for performing manipulations on outstretched arms. The main disadvantage is the dependence on the length of the cord, limiting the mobility of movement with the tool.

The rating of hot glue guns in this category contains instances for regular tasks or periodic use in everyday life.

 Bosch PKP 18 E sSteinel GLUEMATIC 3002 sMetabo KE 3000 s
Bosch PKP 18 E Steinel GLUEMATIC 3002 Metabo KE 3000
 
 
Power, W  200 200  200 
Diameter of the rod, mm 11  11  11 
Weight, kg  0,35 0,32  0,25 
The length of the glue stick, mm  200 200  200 
Productivity, g / m 20  16  18 
Electronic temperature control  no  yes  yes

Bosch PKP 18 E

The gun has a safe and convenient design with a wide mechanical trigger, rounding at the end of the handle and a metal leg for setting a heated tool on a flat surface. A power of 200 watts ensures fast adhesive melt

Bosch PKP 18 E

 Bosch PKP 18 E 1m

 Bosch PKP 18 E 2m

 

+ Pros of Bosch PKP 18 E

  1. It fits comfortably in the hand.
  2. It has great endurance - in three years it is able to pump 100 kg of glue and remain operational.
  3. A long spout allows you to feed the substance into narrow and inaccessible places.
  4. Quickly gaining operating temperature.
  5. Easy to pull the trigger.
  6. A large amount of glue leaves in one click, which reduces the number of manipulations and simplifies the process.

 

- Cons Bosch PKP 18 E

  1. High consumption of rods.
  2. The nose leaks a little, which is why puddles form on the table that are difficult to tear off.
  3. If you try to use a pistol that has just been turned off, then the gum bursts from the pressure of the hardening glue and the tool then becomes leaking.
  4. After work, the nozzle becomes very clogged.
  5. When the rod is used up by 70%, the feeding mechanism can no longer push the remainder, and it is difficult to remove it from the outside.

Conclusion. The performance of the glue gun reaches 20 g per minute, which ensures high speed of work. Due to the thickness of the rods of 11 mm, they do not have to be changed often.

 

Steinel GLUEMATIC 3002

Powerful glue gun consuming 200 watts and having a short nose with a metal nozzle. The heating temperature reaches 206 degrees.

Steinel GLUEMATIC 3002

 Steinel GLUEMATIC 3002 1m

Steinel GLUEMATIC 3002 2m 

 

+ Pros of Steinel GLUEMATIC 3002

  1. The curing time of the glue after application with such a gun is 2 minutes.
  2. It interacts with common rods with a diameter of 11 mm and a length of 200 mm.
  3. Weight 300 g does not tire the hand.
  4. If you forget to turn off and leave the gun all night, then nothing will happen.
  5. There is a long cord that does not require carrying.
  6. Two positions of an emphasis with a stable statement.
  7. On sale there are three nozzles of various lengths for delivering the substance to inaccessible places.

 

- Cons Steinel GLUEMATIC 3002

  1. There is no protection against drops, so maximum accuracy is required and then you still have to wipe the traces.
  2. The heating time of 7-10 minutes is quite long.
  3. There is no case in the package - it is inconvenient to transport.
  4. The wire is tough, so it’s a little difficult to manipulate the glue gun for jewelry.
  5. The first time, when removing the nozzle from the feed point, the glue thread stretches - this passes only after 20 minutes of operation.

Conclusion. A good glue gun for connecting various materials (glass, ceramics, plastic, wood, tiles, iron).In order to firmly glue all of these heterogeneous materials, you need to select the adhesive viscosity individually, for which temperature adjustment is provided in the gun.

 

Metabo KE 3000

A glue gun of compact dimensions 280x170x30 mm and weighing only 250 g. At the same time, rods 200 mm long and 11 mm in diameter are inserted into it. Able to work with a capacity of 18 g per minute.

Metabo KE 3000

Metabo KE 3000 1m

 Metabo KE 3000 2m

 

+ Pros of Metabo KE 3000

  1. Ball valve protects against adhesive leakage.
  2. Convenient grip of the handle with a rounded edge.
  3. High-quality assembly of the case without backlash.
  4. The push mechanism moves the rod well.
  5. It is collected in Romania, not in China.
  6. When the trigger is released, the glue immediately stops flowing - this helps to accurately dose the material consumption.

 

- Cons Metabo KE 3000

  1. When the gun, which remains in the on state, does nothing for 15 minutes, the temperature from the heating pair rises and melts the core from the outside - the glue becomes flexible and is poorly advanced by the mechanism.
  2. If you buy not original rods, but Chinese ones, then they will be a little narrower, and the molten glue will leak through the sealant.
  3. There is no long nose and separate nozzles for sale.
  4. The case is connected by rings, not by screws, so it is more difficult to disassemble for repair.

Conclusion. Adjusting the temperature will help to adjust the supply and consistency of the adhesive for both a thin gap in the structure and for a wide gap. A heating time of 6 minutes allows you to immediately start work. Due to the weight of 250 grams, his hand will not get tired during the whole working day.

 
Which network glue gun did you decide to buy?

The best battery powered glue guns

Battery-powered models are similar in principle to working with network guns, only completely devoid of wires, so they give greater freedom of movement. They are available in classic L-shaped or I-shaped, which depends on the manufacturer.

They consume very little energy when turned on, so they can remain autonomous for a long time. Equipped with glue sticks with a diameter of 7 and 11 mm. By weight, they are slightly heavier than their network analogues, which depends on the parameters of the battery.

 Bosch Glue Pen sRyobi ONER18GLU 0 s
Bosch Glue Pen Ryobi ONE + R18GLU-0
 
 
Battery Voltage  3,6 18
Diameter of the rod, mm 7 11
Weight, kg  0,142 0,39
The length of the glue stick, mm  150 200
Drop protection  yes  no

Bosch Glue Pen

The glue gun is powered by a 1.5 Ah battery and consumes 5.4 watts. A drop protection in the form of a valve is integrated into the nozzle. The moment of readiness for work after switching on comes in 15 seconds. Interacts with rods 150 mm long and 7 mm thick.

Bosch Glue Pen

Bosch Glue Pen 1m

 Bosch Glue Pen 2m

 

+ Pros of Bosch Glue Pen

  1. The kit comes with a USB charger.
  2. 4 rods are attached to the gun to get started right away.
  3. Able to melt 6 standard rods on a single battery charge.
  4. Convenient wide key for pushing glue.
  5. The shape of the handle with a rubberized surface is optimal for a comfortable hold.
  6. Easy to crawl into a bottleneck due to the smooth body.
  7. If the regular charge breaks, then it will work from any micro phone.

 

- Cons of Bosch Glue Pen

  1. The 150 mm short shaft is completely buried in the housing and is difficult to pull out or push in case of jamming.
  2. Thin “cartridges” of 7 mm in diameter are positioned as “for creativity”, therefore they cost more than ordinary 11 mm in diameter.
  3. No temperature adjustment.
  4. Over time, the engagement mechanism is erased to push the rods - you need to disassemble and glue a piece of the blade on its end to increase the grip reliability.

Conclusion. The glue gun in the ranking of models with batteries takes first place due to the weight of 140 g and a small body, which is convenient for use. It is the best for small jobs, and thanks to the battery it can even be taken to school for work lessons.

 

Ryobi ONE + R18GLU-0

Universal glue gun with a battery located at the bottom of the handle.Two-finger trigger is easy to press. The rubberized handle prevents the instrument from slipping out of the hands. The heating time to working condition is 2-3 minutes.

Ryobi ONER18GLU 0

Ryobi ONER18GLU 0 1m

Ryobi ONER18GLU 0 2m 

 

+ Pros Ryobi ONE + R18GLU-0

  1. There is an indicator with an LED indicating whether the gun is turned on now - this will help not to leave it discharged after use.
  2. If you connect a 5.0 Ah battery, its charge will be enough to melt 60 rods 200 mm long and 11 mm in diameter.
  3. The battery is suitable for any instrument of the same brand.
  4. Pushing rods effortlessly.
  5. Narrow nozzle for hard to reach places.

 

- Cons Ryobi ONE + R18GLU-0

  1. It comes without a battery, which costs almost as much separately as the gun itself.
  2. No electronic temperature control.
  3. There is no protection against drops.
  4. With a battery, it weighs almost 600 grams, which can tire your hand with prolonged use.
  5. It cools for a long time, and all this time the glue continues to drain.

Conclusion. The absence of a cord gives greater freedom of movement. Powered by an 18 V battery, you can set temperatures up to 195 degrees and melt standard rods with a diameter of 11 mm for high performance.

 
What kind of cordless glue gun do you plan to buy?